1
00:00:00,350 --> 00:00:04,710
Open BIMSpeed .str, expand Rebar Visibility,

2
00:00:04,870 --> 00:00:06,870
and choose Rebar Shape 2D.

3
00:00:07,270 --> 00:00:10,770
This is a detailed drafting command, separate from reinforced

4
00:00:10,770 --> 00:00:11,230
symbol.

5
00:00:11,550 --> 00:00:14,610
Use a plan or section showing the source rebar,

6
00:00:14,770 --> 00:00:17,630
then select that rebar and a destination point for

7
00:00:17,630 --> 00:00:18,050
the detail.

8
00:00:18,430 --> 00:00:20,750
The command asks for a rebar element.

9
00:00:20,930 --> 00:00:24,010
Select the actual bar or rebar set, not its

10
00:00:24,010 --> 00:00:24,770
concrete host.

11
00:00:24,970 --> 00:00:27,970
A copied column cage supplies the selectable bars in

12
00:00:27,970 --> 00:00:28,650
the practice file.

13
00:00:29,250 --> 00:00:31,950
After the pick, BIMSpeed prompts for a point where

14
00:00:31,950 --> 00:00:32,930
the shape will be placed.

15
00:00:33,210 --> 00:00:35,390
Pick a clear point in the same two -dimensional

16
00:00:35,390 --> 00:00:35,690
view.

17
00:00:36,090 --> 00:00:39,010
The command returns to its next rebar prompt, so

18
00:00:39,010 --> 00:00:40,030
press Escape when finished.

19
00:00:40,550 --> 00:00:43,270
This first 3D view attempt did not yield a

20
00:00:43,270 --> 00:00:44,950
visible annotation in the captured image.

21
00:00:45,350 --> 00:00:48,230
A section or plan verification is still required.

22
00:00:48,450 --> 00:00:50,470
Do not treat the pick sequence as proof of

23
00:00:50,470 --> 00:00:51,470
a finished 2D shape.