1
00:00:00,350 --> 00:00:02,350
Select a native structural beam.

2
00:00:02,750 --> 00:00:06,210
Open BIMSpeed .str and choose Formwork.

3
00:00:06,570 --> 00:00:10,470
The practice beam is a D300x600mm member.

4
00:00:10,750 --> 00:00:13,590
The tool can also inspect the active view or

5
00:00:13,590 --> 00:00:14,170
a selection.

6
00:00:14,450 --> 00:00:17,030
Confirm the scope before a larger project run.

7
00:00:17,030 --> 00:00:21,290
In Formwork, choose Active View for the visible model

8
00:00:21,290 --> 00:00:24,090
or Select Elements for a bounded selection.

9
00:00:24,690 --> 00:00:28,410
Enable the bottom, top, and side surfaces required by

10
00:00:28,410 --> 00:00:28,950
your takeoff.

11
00:00:29,510 --> 00:00:32,030
Review the eight component category switches.

12
00:00:32,410 --> 00:00:36,410
In this installed build, the Select Elements checkbox is

13
00:00:36,410 --> 00:00:39,810
bound to linked selection internally, so verify the selected

14
00:00:39,810 --> 00:00:42,030
set before relying on it for a whole project.

15
00:00:42,030 --> 00:00:45,950
Use Add Parameter to map outputs to the project

16
00:00:45,950 --> 00:00:47,530
parameters required by a schedule.

17
00:00:48,090 --> 00:00:51,170
Confirm that the chosen parameter exists and has a

18
00:00:51,170 --> 00:00:53,030
compatible area unit before running.

19
00:00:53,530 --> 00:00:56,170
The resource file for the installed add -in was

20
00:00:56,170 --> 00:00:59,310
restored from its own supplied 53 parameter list for

21
00:00:59,310 --> 00:00:59,750
this capture.

22
00:01:00,190 --> 00:01:04,590
The selected beam now has FW area 11 .026

23
00:01:04,590 --> 00:01:08,830
m2, bottom 2 .205, and sides 8

24
00:01:08,830 --> 00:01:09,650
.821.

25
00:01:09,970 --> 00:01:11,790
Those values sum to the total.

26
00:01:12,530 --> 00:01:15,330
Verify the parameters and Revit properties and save the

27
00:01:15,330 --> 00:01:15,830
RVT.

28
00:01:16,390 --> 00:01:19,190
This is measured output for the native beam case.

29
00:01:19,370 --> 00:01:22,610
Wall merging and linked elements were not independently proved.