BIMSpeed educational practice — Revit 2024
Installed package: 2026.10.23.2046

INPUT.rvt: copied generated LPQ representative fixture; contains older slab steel/drawings. OUTPUT.rvt: newly saved result; NOT the input renamed.
Provenance: tools/SlabDrawing.RevitSmoke/SmokeApp.cs creates the representative floor footprint from a template with synthetic grid/panel dimensions and an omitted stair bay; it is not the private Xhome project.

Native service adapter, not interactive ribbon/license/selection execution. Values are test inputs, not approved design. Positive geometry does not void-cut the Floor.
Mushroom geometry uses explicitly supplied synthetic support footprints, so exact entry reproduction requires matching actual supports.
Open OUTPUT.rvt and the product-specific ACTUAL_3D/ACTUAL_PLAN or STEEL_3D/STEEL_PLAN views. Rebar values are per host, not all pre-existing steel. Settings raw JSON is reference input, not a certified cross-host UI preset.
Save As a working copy. Save/reopen persistence was checked. Hooks/laps/punching resistance, structural capacity and drawing release quality are not established.

MUSHROOM_MATS_ZONE_HOLES | host 498779 | PASS | 56 final elements | persisted True
UBOOT_MATS_RIBS_HOLES | host 498790 | PASS | 29 final elements | persisted True
BUBBLE_MATS_HOLES | host 498801 | PASS | 52 final elements | persisted True
