1
00:00:00,350 --> 00:00:04,710
On BIMSpeed .str, expand Column Rebar

2
00:00:04,710 --> 00:00:07,530
and choose Column Rebar V2 .0.

3
00:00:07,730 --> 00:00:11,970
The back -end rank names Column Rebar CMD, which

4
00:00:11,970 --> 00:00:14,730
is distinct from the classic Column Rebar tool covered

5
00:00:14,730 --> 00:00:15,110
earlier.

6
00:00:15,550 --> 00:00:19,090
Work on a copy before creating bars because an

7
00:00:19,090 --> 00:00:20,710
existing cage may be duplicated.

8
00:00:21,610 --> 00:00:26,090
Geometry and Rebar Sets Cover, Main Bar Diameter, Edge

9
00:00:26,090 --> 00:00:30,230
Counts, CX and CY, Stirrup Diameter, Hook Bar,

10
00:00:30,590 --> 00:00:31,510
and Section Arrangement.

11
00:00:31,810 --> 00:00:35,410
Check the preview and the actual concrete section before

12
00:00:35,410 --> 00:00:35,870
applying.

13
00:00:35,870 --> 00:00:40,030
The captured example shows D18 main bars and

14
00:00:40,030 --> 00:00:40,950
D8 stirrups.

15
00:00:41,450 --> 00:00:45,850
Choose uniform or zoned spacing, such as A1, A2,

16
00:00:46,070 --> 00:00:46,630
A1.

17
00:00:46,990 --> 00:00:50,930
Enter first stirrup distance, closed zone spacing or quantity,

18
00:00:51,110 --> 00:00:52,370
and L1 criteria.

19
00:00:53,290 --> 00:00:56,510
Review lap and top zones, and whether stirrups extend

20
00:00:56,510 --> 00:00:58,210
into the beam or slab above.

21
00:00:58,870 --> 00:01:02,410
Additional ties have their own diameter, hooks, and spacing

22
00:01:02,410 --> 00:01:02,770
behavior.

23
00:01:02,770 --> 00:01:07,330
The Foundation tab enables weighting or starter bars, split

24
00:01:07,330 --> 00:01:10,570
direction, tie spacing, HM, and LB.

25
00:01:10,990 --> 00:01:14,070
Check the foundation host and the arrow orientation.

26
00:01:14,430 --> 00:01:15,870
Reverse changes direction.

27
00:01:16,710 --> 00:01:19,130
In this recorded model, the tab is a setting

28
00:01:19,130 --> 00:01:20,110
demonstration only.

29
00:01:20,390 --> 00:01:22,190
No starter bar creation is verified.

30
00:01:23,290 --> 00:01:27,270
General includes hook choices, lap and anchorage lengths, partition

31
00:01:27,270 --> 00:01:30,570
and elevation data, splice position, and beam or floor

32
00:01:30,570 --> 00:01:31,130
association.

33
00:01:31,130 --> 00:01:35,110
The earlier copied model already contains a classic cage,

34
00:01:35,270 --> 00:01:37,890
so these V2 settings were not executed over it.

35
00:01:38,170 --> 00:01:41,690
A clean model output check remains required before using

36
00:01:41,690 --> 00:01:44,050
it as a completed V2 reinforcement example.

37
00:01:44,050 --> 00:01:44,200
A clean model